Monday, 18 October 2010

Immortal Tutorial

AD_Immortal_Ishona

 

Scrapkit used Sacrifice by Dnscraps available HERE    

Supplies needed: Template 333 from Missy available HERE and a font of choice.

I used the awesome artwork from Myka Jelina available from CILM. Remember you need a license to use this artwork.

Open the template and delete text layers. I opened the background layer as I prefer working with a background.
Select Circle 4 – Open sacrificepaper16 and paste onto the template resize 80% x2 then resize 90%. Invert selection and delete excess paper. Delete circle 4 layer and then lower opacity 48%
Repeat with the following layers and papers.                    Circle 2 - sacrificepaper7 resize 80% x2
Rectangle 2 - sacrificepaper10 resize 80%
Close off/delete template layers
Position your tube. I then lowered the opacity on mine to 78% duplicated and then erased her torso, upper arms and head on the top copy to reduce the brightness but to leave the bottom half of the tube more solid so the pattern on the paper didnt show through.

Add elements of choice. Your choice and placement may be different but I used these elements:
sacrificecup
sacrificebottle
sacrificeskulls
sacrificerose
sacrificecoffins
sacrificecross6 on the right side of my tag and
sacrificefire3 along with sacrificedoublehearts2 (which I placed under circle3 so only half is visible)

Add drop shadows of choice.

I then added sacrificelovechain, resized, mirrored and positioned, then erased parts of the chain
to give the effect it was wrapped round the tag.

I added sacrificewordart5 resized to fit inside the circle.
Applied Eye candy gradient glow with these settings Image5

Resize your tag if you want as the template is quite big.

Add your copyright info and text and you're done.

Saturday, 18 September 2010

Mon Beau Jardin

No tut today but I do have a Layout for you instead.
I created this page using a pretty kit called Mon Beau Jardin
created by Kissed By Pix 


Sunday, 12 September 2010

Athena's Dream Tutorial

I used the beautiful Athena's Dream kit
by Digicats available exclusively HERE

Font used was used akaFrivolity available Here  


Open a new image 600x600. I flood filled white so I could see what I was doing
and then deleted the white layer later to save as a PNG.

Open DCD_AtDr_Frame06 resize 60% and rotate 90 degrees so it is running horizontal
Using your magic wand select inside the frame and then modify, expand 20

Open a paper of choice I used DCD_AtDr_Paper12 resize it and position to suit and paste beneath the frame layer. Invert selection and delete to get rid of the paper outside the frame.

Add drop shadow to the frame to give it some depth.

I then placed DCD_AtDr_Aurora01 below the frame layer and using a large eraser with a
low opacity setting slightly erased its straight edges to give it a softer appearance.

Open DCD_AtDr_Ladder resize, position on the tag so the top strings line up on the frame and the bottom hangs out over the frame edge.

DCD_AtDr_Rainbow01 resize and position so it comes out over the right side of the frame.

add DCD_AtDr_Tree resize by 80% and position just outside the frame on the right side of the tag

Add a tube of your choice or use one of the great posers 
(©Sinful Mindz) included in the kit.
I chose sm_eternal1_3 and positioned it over on the right so it places the
tube in front of the tree.
Between the tube and tree layers I placed DCD_AtDr_Butterflies02 resized 60%.
position best to fit with your tube position.

Place DCD_AtDr_Wildflowers in front of the tube resizing to suit.

Of course you can decorate your tag as you wish but I chose the following elements: DCD_AtDr_Sun
DCD_AtDr_Dove mirrored and rotated
DCD_AtDr_Drops duplicated and erased to give the impression 
it is wrapped round the frame.
DCD_AtDr_Flower Border recolored with a blue shade from the paper.

All elements were given appropriate drop
shadows.
Add copyright info and text.
Save your tag and you're done :)

Monday, 22 March 2010

Venus Tutorial

Scrap Kit used Venus by Athena Designs available HERE
I also used the awesome artwork of Myka Jelina 
which is available from CILM. Please remember you need 
a license to use this artwork.

Font of choice. I used LD Forget Me Not available HERE
 
New image 600x600
Open frame of your choice, I chose Athena_Venus_Frame1
Paste as a new layer.
Select inside the frame, expand selection 10
paste paper of your choice as a new layer below the frame layer.
I used Athena_Venus_Paper6
Selections, invert &gt, select paper layer and delete.
 
Paste your tube layer, resizing as needed.
Copy and paste elements of your choice, resizing to fit your tag
I used:
Athena_Venus_Candle4
Athena_Venus_Feather3
Athena_Venus_Feather1
Athena_Venus_Flower4
Athena_Venus_Flower3
 
Add drop shadow of your choice to your tube and element layers.
 
If you want the feather popping out of the frame like mine
duplicate your frame layer, drag it above the feather layer
and erase all except the part you want over the feather.
Add drop shadow to only the bottom frame layer.
 
Add copyright information and your watermark.
Add text of choice.
If you don't want to animate you can now
save your tag as a JPG or PNG
 
To Animate
 
Merge Visible your main tag layers.
Duplicate this layer twice so you have 3 layers of it.
Select around the flame using lasso tool.
Select the top tag layer
Eye Candy 4000, Fire
 

These are the settings I used but you can change them to suit.
Close off the top layer and open up the next.
Change only the random seed
Close this layer and open the 3rd changing the random
seed on Eye Candy again.
 
Opening and closing these animated layers as you go copy merged
each layer over to AS. Paste the first as a new animation and the
rest paste after current frame.
 
Select all and adjust frame properties to change
the animation speed if you wish.
 
Save and you are done.

Sunday, 14 March 2010

Irish Eyes Tutorial

I used the awesome kit Irish Gold from Digicats (and Dogs)
You can get it HERE 
 and for one week its totally free!!!!
After that it will be available as a PTU kit in the store
I also used the awesome artwork of Walter Girotto
You need a license to use his artwork from MPT
 
Ok lets gets started!
Open DCD_IG_Frame01
Select inside the frame and expand selection by 10.
Add a new layer beneath the frame layer
Using a paper of choice (I used paper 11)
copy and paste it into the selection.

Add a drop shadow to the frame on its own layer.
I used 4,4,60,12 and repeated -4,-4,60, 12.
Deselect
Paste your tube as a new layer above the paper, 
resizing if needed. Select inside the frame again,
expand by 10, invert, and delete any
parts of the tube ouside of the frame.
Add drop shadow of choice.
Open DCD_IG_hanging shamrocks
paste as a new layer, resize 50% position and add shadow,
erase anything showing outside of the frame.

Increase canvas size to 1000x1000, we can crop it later.
Add elements of your choice resizing as needed and
dont forget your drop shadows as you go.
I used these elements:
DCD_IG_Horse
DCD_IG_Harp
DCD_IG_Pot O Gold 01
DCD_IG_Journal
DCD_IG_Rainbow03
DCD_IG_Butterfly05
Add your text of choice. I typed 'Irish Eyes' using
DJLuck and positioned above the rainbow layer
but below the horse.
Merge visible, add main text and any copyright 
information and save!


Sunday, 7 March 2010

Rock Star - Crazeds Creations


I used the awesome kit Rock Star from Crazed's Creations.
You can get it HERE
I also used the awesome artwork of Alayna Magnan
You need a license to use her artwork from MPT
The mask I used is one by Jazzy Designs called 3D Wall
I can't find a link so if anyone knows where to find it please let me know.
Font is Most Wasted available at Da Font.

Ok Lets get started:

Make a new image 500x500. Flood fill White.
Select all and add a new layer.
Paste the paper of your choice into the selection.
I used Crazeds_paper8_RST.
Layers, New Mask layer and apply your mask
and merge the group.
I then duplicated my mask layer to make it more defined
but you might not need to if you use a different mask.

Copy Crazeds_drums1_RST and paste as a
new layer, resize 75%
Copy and paste the tube also resizing 75%.
Position the tube so it covers the front drum.
See my tag for guidance.

Add elements of your choice, resizing and
adding shadows as required.
There are lots to choose from but I used these elements:
Crazeds_amp1_RST
Crazeds_speaker1RST
Crazeds_guitar3_RST
Crazeds_doodle6_RST
Crazeds_tag4_RST and Crazeds_ball1_RST 
both of these I recolored to match the pink from the tube.

Add the text "Rock Star" to the tag and apply the
following cutout in the same color as your text
-20,-20, 78, 100.
Then apply a drop shadow of 2, 2, 40, 2 in white.

Do the same adding the text of your choice to the pink drum.

And that's it, save your tag and you are done.





Monday, 11 January 2010

Funky Love - Time Limited FTU






Supplies needed:
Scrapkit Funky Kind Of Love from Wicked princes Scraps HERE
This is a time limited freebie and is available for one week.
Font I used Knustler Script included with Vista.

Open WP_FKL_BUTTERFLYWIRE copy and paste
onto a new image 700x700, we'll crop later.
WP_FKL_LOVE paste as a new layer, resize 75% and
position so she looks like she is sitting on the frame
Highlight frame layer and free rotate right 10 degrees
so the butterfly isn't in her butt lol.
Open WP_FKL_ROSESCLUSTER and resize 20%
and position on the frame top left.

Open paper of choice
resize 75% twice until it is a little bigger that the frame.
Duplicate paper layer 3 times so you have 4 layers.
Top layer rotate free 45 degrees
Next layer rotate free 90 degrees
Next layer rotate free 135 degrees
Back to your frame layer and click with the magic wand inside the frame
Selections, Modify, Expand by 2
Selections invert
Click delete on each paper layer so the paper is inside the frame only.

Add drop shadows to the frame, doll and Rose Cluster
I used 2,2,60,6

Crop off the excess space around your tag
Add a new layer, bring to the bottom and flood fill white (or color of your choice)
Add your watermark, copyright info and text.

Close off all but the top paper layer, copy merged and paste
into AS as a new animation.
Close off that paper layer, highlight the next and copy merged
paste after current frame.
Continue until you copied over all your layers so you have 4 frames
select all, change frame properties to your liking
I did mine at 40, save and thats it, you are done!

Sunday, 27 December 2009

Holding The Future




I used the scrapkit Gold Christmas Joy 
from Pspgirl available from Scrappetizing
I also used the beautiful artwork of Unholy Vault
You need a license to use this tube available from MPT 
Font used is Mr Lackboughs
Mask is Artmama Mask 08 available HERE


Open a new image 600x600, flood fill white
Open Pspgirl_GoldChristmasJoy_Paper12
duplicate and resize to 75%, paste as a new layer
 
Layers new mask layer from image making sure invert is checked.
Merge group then merge visible.
 
Open Pspgirl_GoldChristmasJoy_Element21 and position
at the top of the tag, duplicate, flip, merge down.
Duplicate and rotate 90 degrees, merge down 
and add a drop shadow.
 
Pspgirl_GoldChristmasJoy_Element51, paste as a new layer.
Add a small drop shadow.
 
Pspgirl_GoldChristmasJoy_Element36 
resize 50% twice and sharpen.
Pspgirl_GoldChristmasJoy_Element35 
resize 50% twice and sharpen and flip.
Add drop shadows and position using my tag as a guide.
 
Paste your tube and add a drop shadow.
Add any copyright information and your watermark.
Add text and position as desired.
 
Locate the layer for Pspgirl_GoldChristmasJoy_Element51
Mine was layer 3 and duplicate twice
Select the top one of these layers Add noise Gaussian, Monochrome, 30%
Next layer repeat noise at 40%
New layer repeat noise at 50%
 
Close off 2 of these duplicated layers leaving the top one open
copy merged and paste into AS as a new animation
Close that layer, open the next and copy merged, pasting after current frame
Repeat for the bottom noise layer.
 
Check your animation and if you are happy save your tag!

Saturday, 19 December 2009

Lets Get This Party Started




For this tut I used the absolutely beautiful kit
Happy New Year from Heaven Dreams
available at SCRAPPETIZING
 

I also used the lovely artwork of Keith Gravey
You need a license to use this tube available from MPT 
Font used is Alex Brush 
 

Open a new image of 700 x 700.
I like starting big to aid with the placement
and then resize later lol.
Open paper HD_Happy_New_Year_paper08_tgs
and paste as a new layer.

Now this tut is so simple and you can use any elements
you like to get it how you want but I used these ones.
All were resized and sharpened using the unsharp mask
Radius 1, Strength 75 and Clipping 1

HD_Happy_New_Year_element_26_tgs rotated 40 degrees left
HD_Happy_New_Year_element_17_tgs
HD_Happy_New_Year_element_21_tgs
HD_Happy_New_Year_element_42_tgs
HD_Happy_New_Year_element_49_tgs
HD_Happy_New_Year_element_79_tgs
HD_Happy_New_Year_element_45_tgs
HD_Happy_New_Year_element_64_tgs
Also of course add your tube and position as desired
you can use my example as a guide.
Add drop shadows to all your elements and the tube.
I used various settings to give the tag a bit of depth.

Once you have all your elements placed as you want them
crop the additional space from around the tag but leave 
a bit of room for the frame so that it wont 
cut into your elements.
I used Edge Design 01 which is built into psp 9.
If you find it does cut into the elements undo it and undo the 
crop until you get it where you need it.

Merge visible and Resize the tag if it is still 
too big for your tastes.
Add your copyright information and watermark.
For the text I used Alex Brush 60pt and added a drop shadow
using these settings H1, V1, Opacity 40 and Blur 2

Then add Eye candy 4000 Gradient glow using these settings
along with a gold color tone from the paper I used #e7e088


Export your tag as a jpg and you are done.

Friday, 11 December 2009

Chillin'




For this tut I used the gorgeous kit Let it Snow
from Crazed's Creations. You can get it at SCRAPPETIZING

Template #18 from Ali available HERE

I also used the gorgeous artwork of Elias Chatzoudis
You need a license to use this tube which is available from MPT
Open the template, copy and close the original.
Delete layers DBA, Rantangle1 and Rectangle 2
we won't be needing those.
 
With your magic wand click on the large circle layer
Open paper Crazeds_papers10_LIST resize 65% and paste as a 
new layer. Invert selection, delete. 
Select none and delete the large circle layer.
 
With your magic wand again, Mode Add(shift), 
select each of the photo layers.  
The selections will join up but thats ok.
Open Crazeds_papers6_LIST, resize 75% paste as a new layer. 
Position the paper so the whole selection is covered. 
Invert, delete.
Delete the 3 photo layers and then drag the paper layer 
below all the frame layers.
 
Clicking each frame layer in turn adjust - color balance - manual color correction. Put black as the source color and change the target box to a light color from the paper. I used #ccdef2. Add a drop shadow to each frame layer. I used 1, 1, 30, 20.
 
Increase your canvas size to give you room to work
and add a new layer, flood fill white and drag to the bottom.

Copy and paste your tube resizing as needed. Add the same drop shadow as before.
Now add your elements, I used: Crazeds_sign1_LIST, Crazeds_tree3_LIST, Crazeds_bird2_LIST, Crazeds_bells2_LIST. Resize as needed and add your shadows.
I also used Crazeds_snowflakes1_LIST and resized to fit in the small frame on the right and duplicated for the center frame.
 
Once you are happy with the positioning, click on the circle layer. I moved mine a little as well. Selections - select all - float - defloat so that just the circle is selected.
Add 3 new layers above the circle layer.
Select the top one of these 3 new layers.
VDL Adrenaline - Snowflakes. Settings I used were
55, 0 20, 37, 38, basic snow and a random seed of 1.
Close off that layer, highlight the next one down and 
go to your plugin again changing only the random seed.
Repeat for the 3rd new layer.
 
Add your text and copyright info and watermark.
Crop off the excess space and resize if desired.


Now you are ready to copy over into AS.
Close off 2 of the snow layers, leaving the top one open.
Copy merged and paste in AS as a new animation.
Close the snow layer and open the next one down,
copy merged again and paste after current frame.
Repeat for the last snow layer.
Change your frame speeds if desired. I set mine on 20
Save your tag and you're done.

Saturday, 28 November 2009

Snowy Ride





I used the cute kit Snow Friends from Crazed's Creations
which is available HERE
I aslo used the wonderful artwork of Molly Harrison.
 
In order to use the image in this tutorial you MUST purchase it from CILM. 
 
Supplies - Scenery Mask and Snow Animation HERE
Font used is palace Script but any pretty script font will work.

Open paper7 in PSP, duplicate and close the original.
Paste Crazeds_frame1_SFT as a new layer.
Paste your tube as a new layer and position as desired.
Duplicate your frame layer and arrange layers so one frame layer is 
above the tube and the other is below the tube.
Select the top frame layer and erase any areas where you 
want the tube outside of the frame.
Add drop shadow to the tube and the bottom frame layer.

Crop excess paper from around the frame
Resize to 450 pixels wide.
Add a new layer and flood fill white, send to bottom.
With the paper layer selected, layers, new mask layer from image
and select Saphiere_GraphicDream_Mask_Castle_13.
Merge the group.
Using the rectangle selection tool draw a selection through the 
widest points of the star just like in screenshot.

Invert selection then delete. Erase any corners 
so the mask layer is totally inside the frame.

Add and arrange any elements of choice.
I used tree_SFT, sign2_SFT and bow3_SFT.
Dont forget to shadow as desired.

Add your text, watermark and copyright information.

To Animate:

To set your animation just like it is in my example above...
Close of all but the white layer and the mask layer,
copy merged and paste into animation shop.
Open the snow animation and duplicate the tag 
so you have the same number of frames (10).
Select the first frame on each animation, select all
then drag the snow animation onto the tag.

Back into PSP, close off the 2 background layers and 
copy merged the rest of the layers and paste into 
animation shop. Duplicate so there are 10 frames.
Select all and drag over onto the frames that already
have the background and snow in place.
Position carefully (undo drag if you mess up).
Save the tag and you are done.

If you prefer you can just copy over the tag complete and
put the snow frames on top of the tag frames.
That will give this result.


Saturday, 21 November 2009

WinterSong




I used the lovely kit Wintersong from Designs by Stina
which is available HERE
I aslo used the wonderful artwork of Gene Gonzales

In order to use the image in this tutorial you MUST purchase it from CILM.


Additional Supplies Needed:
Mask from Gabbe available HERE
and a star tube if you want to animate


Open a new image 650 x 650
Flood Fill with white
Selections select all, add a new layer
Open paper of choice, I used DBS_Paper02, paste into selection
Select none
Layers - new mask layer - from image
I used gabeemask6, check invert mask data, apply and then merge group

Open DBS_Tree02, resize 70%, paste as a new layer
Add other elements of your choice, resizing as needed and don't forget to add drop shadows.
I used DBS_Gifts02 and DBS_Dove02

Add your tube of choice and move layer below the gifts layer and arrange as needed

Merge all and resize, then add copyright info and watermark

Add your text and merge all. Save it as is if you don't want to animate

To animate:

Duplicate layer twice so you have 3 layers
Using a star tube dot stars around on each layer where you want the twinkle to be
Use different sizes to add some variety.
Save the tag and open in Animation shop, select all frame and change the frame speed to about 30 view and if you are happy save it.


Thursday, 19 November 2009

Fall Beauty




Kit used was Fall Fae made by JTs Designs.
It is available from SCRAPPETIZING.


I am also using the beautiful artwork of Jennifer Janesko.
In order to use the image in this tutorial you MUST purchase it from CILM. 

I used Eye Candy 4000 Gradient Glow 
on the text but that is optional.
 



Open new image 650 x 650 transparent.
Open wreath 2 copy and paste as a new layer.
With your magic wand, click inside the wreath. 

Modify, expand by 20.
Paste paper 11 as a new layer below the wreath, 
Invert selection and delete
so the paper is just inside the wreath.

Add a drop shadow to the wreath. I used V6/H6/Opacity 30/Blur10
and then repeated with V-6/H-6.

Copy your tube of choice and paste as a 
new layer above your wreath layer.
Duplicate the tube and drag the duplicate below the wreath layer.
Select the top tube layer and erase the areas you 
dont want under and outside the wreath.

Then select the duplicated layer and remove 
anything visible outside the wreath.
Add a drop shadow to the bottom tube layer only.

Open swirl 2 and resize 75% twice. 
Paste as a new layer beneath your wreath layer
and position as desired. 
Add a drop shadow (I used V2/H2/Opacity 40/Blur4)
duplicate layer and mirror, merge the 2 swirl layers together and then
erase any parts of the swirl showing outside the wreath.

Open Wrap 1, resize 75% twice, add a drop shadow and then erase the edges so the wrap stops at the edge of the wreath. 
I found it easiest with the eraser set very large to soften the edges.

Add any other elements of your choosing.

Add your text with a drop shadow or do what i did and use Eye Candy 4000 gradient glow, making a gradient using colors from the tag. Add your copyright info and watermark, save a a PNG and you're done.


Tuesday, 20 October 2009

WinterGreen



Kit used Cool Creatures Mini Kit 2 made by Jules Junk
available at SCRAPPETIZING
This great little kit costs just $1

Bling of choice. Mine came through a share group, if it is
yours please let me know so that I can credit you properly.


Open Jules-CC_K2_Frame2 duplicate and close the original
With the magic wand select inside the frame then expand the selection by 18
so that it lines up with the mid point of the frame.
Open a paper of your choice. I used Jules-CC_K2Paper2
Copy, paste as a new layer and drag below the frame layer.
Invert the selection and click delete on your keyboard so
the remaining paper fills the frame.

Open Jules-CC_K2_Tree and paste as a new layer beneath the frame.
Jules-CC_K2_Sammy and paste as a new layer also beneath the frame layer.
For positioning see my example.

Add drop shadows of your choosing to the elements.

Add your watermark/licencing info and your
text layer adding shadows as needed.

Close all layers except the paper layer and copy merged
paste into AS as a new animation.
Open your bling in AS

Duplicate the paper so it has the same number of frames as your bling.
Click on the first frame of each animation and select all
then drag the bling onto your paper positioning as required.

In PSP close off the paper layer and copy merged all the other layers
Paste into AS a new animation and duplicate so you have the
correct number of frames again. Click on frame 1, select all
and then drag onto your paper and bling animation taking care to
line it up correctly.

Save animation and you are done!

Cool Creature




Tag Created using the Cool Creatures 1 Mini Kit
by Jules Junk available at SCRAPPETIZING.
Another great kit available for just $1

Filter needed VDL Adrenaline Snowflakes HERE
although any filter that creates a snow effect will do.

Open Jules-CC_K1_Frame2 Duplicate and close original

Open Jules-CC_K1_Paper4 duplicate - resize 50% and paste as a new layer on frame.
Drag layer below frame. Lower the opacity to around 58.
Add a new layer below the paper layer and floodfill with white.
Merge the paper layer down onto the white layer.

Open Jules-CC_K1_Tree copy - paste as a new layer above paper and below frame.
Resize as needed all layers unchecked.

Add drop shadow of your choice. I used a blur of 27 on this one to add plenty of depth to the tag.

Open Jules-CC_K1_Polar copy and paste as a new layer above frame layer. Reszie 75% twice.

Using the raster deform tool, rotate him slightly to the left to get his feet as level as possible.

Adjust, sharpeness, unsharp mask using these settings


Position the Polar Bear where you want him, use my tag as a guide.
Add a drop shadow.

Decorate the tag with elements of your choice.
I used Jules-CC_K1_Curl and resized to fit the tag and added a drop shadow.

Add text (I rotated mine) and watermark/licencing info,
Convert all layers to raster layers and add shadow to your text.
I used these settings



Using the selection tool draw out a selection that partly overlaps the frame like this.



Highlight the papers layer in your layer palette and copy,
paste as a new image.
Add a new layer.
Using VDL Adrenaline Snowflakes make your first layer of snow
with settings to your liking.
Add a layer and VDL Snowflakes again clicking random seed once
leaving all other settings the same.
Add a 3rd layer and repeat as above.
You can now delete the paper layer at the bottom so you are
just left with 3 snow layers.

Go back to your tag image and merge the Paper layer, tree and watermark layers.
Copy those layers and paste in Animation Shop as a new animation
Duplicate the frame twice for a total of 3 frames.

Back in PSP highlight layer 1 of your snow image, copy and paste in AS
as a new animation. Highlight layer 2 and paste after current frame, and do the same with layer 3.

You should now have 2 animations in AS.
On each animation click on the first frame and select all
then drag frame 1 of the snow animation and position it carefully on the paper animation.
The other frames will position themselves automatically as long as you selected all.
If you position it wrong undo drag on both and try again.

Back into PSP and close off the tag layers that you already copied into AS.
Click on one of your open layers and copy merged and paste that
into AS as a new animation and duplicate twice so you have 3 frames.
Follow the steps for dragging the snow onto the papers to
drag the new animation on top of the papers and snow animation.

Change your frame speed to a speed you like. I used 35.
Save and you are done!

Reindeer Christmas




Tag created using the cute kit Cool Creatures 3
from Jules Junk available from SCRAPPETIZING
and Vix_ChristmasMask4 available HERE

This Gorgeous kit costs just $1 and thats at regular price!

Open paper Jules-CC_K3_Paper4 duplicate and resize to
520 pixels, promote to a layer.
Open lighter paper of your choice, I used Jules-CC_K3_Paper3
resize by 65% and paste as a new layer over paper 4.

Layers, new mask layer from image and browse for the name of your mask.
I used Vix_ChristmasMask4. Merge the group.

Open Frame Jules-CC_K3_Frame2 and paste as a new layer
Select inside the frame with your magic wand, expand selection by 20.
Invert selection.
Highligh each of the 2 paper layers in turn and hit delete
to remove the excess outside of the frame.
Select your frame layer and add a drop shadow of your choosing.
I used these settings


Add the elements of you choosing.
I used Jules-CC_K3_Tree inside the frame and Jules-CC_K3_Reindeer and
Jules-CC_K3_Present outside the frame, resize as needed and add shadows.

Add your watermark and text using shadows where required,
save as a JPG or as PNG if you want it transparent